WeiHai DuoTeRui Automation Equipment Co., Ltd. was established on July 15, 2016. It mainly engages in the R&D, production and sales of flow meters, and is a technology-based enterprise integrating science, ind...
Product Category
Features:
The multi-hole symmetrical structure features flow straightening and noise reduction functions, improving measurement accuracy.
It has low requirements for straight pipe sections during installation, with a minimum requirement of 2D (upstream) and 1D (downstream) (where "D" refers to the inner diameter of the pipeline).
The standard turndown ratio is 1:10, and the maximum turndown ratio can reach 1:30 to 1:40.
Low permanent pressure loss, contributing to energy conservation.
It is easy to use, inspect, and troubleshoot, with a wide range of applications. It can measure gases, liquids, and steam, and is suitable for scenarios such as high-temperature, high-pressure environments, and the measurement of contaminated media.
Features:
The multi-hole symmetrical structure features flow straightening and noise reduction functions, improving measurement accuracy.
It has low requirements for straight pipe sections during installation, with a minimum requirement of 2D (upstream) and 1D (downstream) (where "D" refers to the inner diameter of the pipeline).
The standard turndown ratio is 1:10, and the maximum turndown ratio can reach 1:30 to 1:40.
Low permanent pressure loss, contributing to energy conservation.
It is easy to use, inspect, and troubleshoot, with a wide range of applications. It can measure gases, liquids, and steam, and is suitable for scenarios such as high-temperature, high-pressure environments, and the measurement of contaminated media.
Parameter
| Specifications | DN20-DN3000 |
| Connection Method |
Flange clamp type, flange connection type, welding type |
| Voltage resistance level | 42MPa |
| Fluid Temperature |
Up to 650 ° C |
| Pressure Tapping Method |
Corner joint ring pressure measurement, corner joint drilling pressure measurement, flange pressure measurement, radial distance pressure measurement |
| Material |
20G、304、316L、15CrMo、12Cr1Mov、 Titanium, Hastelloy, etc |
| Requirements for straight pipe sections |
At least 2D before and 1D after, 5D before and 2D after trade settlement |
